Handleiding
Je bekijkt pagina 9 van 94
- 16 - - 17 -
GB
Preset programmes:
HGScanPRO comes with an alarm function
that is activated when the temperature meas-
ured exceeds or falls below the temperature
selected. The alarm is given in acoustic form by
an audio signal and in visual form by a blue and
red LED ring. The alarm is triggered when the
temperature measured exceeds or falls below
the temperature that is set.
A green LED ring shows that the temperature
measured by HGScanPRO is equivalent
to the target value within the tolerance. The
acoustic audio signal can be deactivated. To
deactivate the audio signal, go to the section
on "Settings".
d) LOC function
To avoid altering the chosen settings unin-
tentionally, the HGScanPRO comes with the
Lockable Override Control Function (LOC).
To find out how to set the LOC function,
please contact our Service Department on
+44/1733/366-700.
Alarm function
Alarm function table
Variations from the temperature setpoint in °C
Alarm tolerance levels 10°C 20°C
Red LED ring and audio signal > 20°C > 40°C
Red LED ring 10°C to 20°C 20°C to 40°C
Green LED ring -10°C to 10°C -20°C to 20°C
Blue LED ring -20°C to -10°C -40°C to -20°C
Blue LED ring and audio signal < -20°C < -40°C
Variations from the temperature setpoint in °F
Alarm tolerance levels 20°F 40°F
Red LED ring and audio signal > 40°F > 80°F
Red LED ring 20 to 40°F 40 to 80°F
Green LED ring -20 to 20°F -40 to 40°F
Blue LED ring -40 to -20°F -80 to -40°F
Blue LED ring and audio signal > -40°F > -80°F
Programme 1 2 3 4
Temperature setting
(°C/°F)
80 °C/180 °F 120 °C/250 °F 160 °C/320 °F 250 °C/480 °F
Airflow setting 4 5 6 5
Emissivity 0.95 0.85 0.90 0.94
Operating voltage: 15V DC
Response time: 500 ms
Spectrum: 8-14 µm
Emissivity: 0.10-0.99
Resolution: 10°C / 10°F
Working distance: 10 cm
IR measurement area: 10:1
Operating temperature: 0-50°C / 32-122°F
Operating air humidity: 10 % - 90 % RH
Storage temperature: -10-60°C / 14-140°F
Storage air humidity: < 80 % RH
Temperature measurement range: 0°C - 300°C (32°F - 572°F)
Accuracy *: ±2°C / ±3.6°F or ±5 % of the temperature measured
Weight: 120 g 85 g
Dimensions: 99 x 95 x 153 mm 88 x 56.5 x 77 mm
*
Accuracy at an ambient temperature of approx. 25 °C and maintaining the optimum distance
from the object being measured.
Technical specifications HGScanPRO 2620 E HGScanPRO2520 E
Emissivity
HGScanPRO's emissivity can be selected to
obtain accurate measurement readings for dif-
ferent materials and surfaces (see table).
The display shows the figures after the
decimal point. (tenths and hundredths)
e.g. 0.93 equates to 93.
The emissivities shown in the emissivity table are approximations. Surface quality, geometry or
other parameters may influence the emissivity of the object being measured.
Please go to our website for a detailed overview:
www.steinel-professional.de/emissionswerte (German)
www.steinel-professional.de/emissivities (other languages)
Surface Emissivity
Car films 0.90-0.95
Wood 0.80-0.90
Rubber 0.85-0.95
Oil-based paints 0.95
Leather 0.75-0.85
Lacquers 0.80-0.95
Paper, card 0.75-0.95
Textiles 0.90
Plastic (PVC, PE, PP) 0.85-0.95
Bekijk gratis de handleiding van Steinel HG Scan PRO 007553, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinel |
| Model | HG Scan PRO 007553 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 15171 MB |