Steinberg SBS-WB-01 handleiding
Handleiding
Je bekijkt pagina 9 van 77
EN
: shift key
▼: decrease key
▲: increase key
4.
3. Setting of temperature parameters:
Press the setting function button “set” to enter the setting state of the temperature setting
value. At this time, the last value of the setting temperature “SV” on the display screen
flashes.
First press the shift button, then press the increase or decrease buttons to set the working
temperature, and then press the setting function button “set” once. At this time, the last
value of the timed shutdown time (min) "0000" on the upper right corner of the display
screen flashes.
If it is not necessary to keep the default "0000" regularly, press the setting function key "set"
again to exit the parameter settings and save the parameter settings values. At this time, the
display "PV" shows the temperature of the liquid medium in the current tank.
5. After the temperature parameter setting is completed, first open the "circulation" button on th
e
o
peration panel, and then open the "refrigeration" button (Note: when the working temperatur
e
exc
eeds 40°C, the compressor automatically enters the protection, and the refrigeration does
not start), and then the microcomputer enters the automatic control state.
6. Description of correction between quantity temperature and actual temperature:
In the normal display state, long press the setting function key "set" for 3 seconds, the
password prompt "LC" is displayed in the upper row of the display window, and the password
value is displayed in the lower row. At this time, press the increase button "▲" to enter the
password "00000 3", then click the setting function button "set" to enter the internal
parameter setting state, and then click the setting function button "set" to select the
parameters to be modified. Select the indicator in the upper window to display the word
"PB1". At this time, it is the temperature correction interface. If the actual temperature is
higher than the displayed temperature, press the increase button "▲" to increase, press the
decrease button "▼" to decrease, and then long press the setting function button "set" for 3
seconds. The parameter values can be automatically saved and exit this state.
P
recautions for use:
1. L
iquid medium shall be added into the tank before use, and air opening is strictly prohibited.
(Note: the liquid shall not contain acid and alkali).
2. The power supply power shall be greater than the total power of the instrument, and the power
supply must have a good "grounding" device. The voltage used shall be subject to the technical
parameter table.
3. The instrument shall be placed in a ventilated and dry place, and the back and both sides shall be
300m
m away from the obstacles to maintain good heat dissipation.
After use, set all switches to off state, unplug the power plug, open the drain valve, discharge the
medium in the tank, and keep the tank dry and tidy.
Bekijk gratis de handleiding van Steinberg SBS-WB-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-WB-01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10574 MB |
