Steinberg SBS-TWB-300 handleiding
Handleiding
Je bekijkt pagina 17 van 225
EN
1- Preset program
2- Set
3- ℃ indicator
4- Heating indicator
5- Alarm indicator
6- ℉ indicator
7- Run/Stop
8- Countdown
9- Over-temperature alarm key
10- ℃/℉ switch
Run/Stop
When the display shows " ," the water bath is in an unheated status. When the actual temperature is
shown on the display, it indicates that the water bath is in heating mode.
Press to switch between heating and stopping the heating process.
Example:
• Current temperature: 50.0
℃.
• To start heating, press the Run/Stop key. The display will show the
- - - -
alongside the current
temperature.
Operation
Display
OFF
Current temperature The bath is in unheated status
- - - - ＆50.0
Press the run/stop key to start heating. The
current temperature will be displayed,
countdown is off.
OFF
Press the run/stop key again to stop heating. The
screen will display "OFF."
Heating temperature setting
Method 1
Directly press to enter the temperature setting mode. Follow the steps below:
Example:
The current temperature is 37.0°C, and set the desired temperature to 50.0°C.
Operation
Display
Directly set the desired heating temperature.
Press the set key to save the value and exit the
setting mode. The display will then show the
current temperature or "OFF."
Bekijk gratis de handleiding van Steinberg SBS-TWB-300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-TWB-300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 35958 MB |
