Steinberg SBS-MR-450 handleiding
Handleiding
Je bekijkt pagina 13 van 193

EN
WARNING! Units are NOT explosion proof. Use caution when heating volatile materials.
DO NOT operate the unit if it shows signs of electrical or mechanical damage. Earth Ground -
Protective Conductor Terminal Alternating Current
III. Warnings
• Use an electrical outlet that operates with a fuse or circuit breaker and a ground fault interrupt
circuit.
•Disconnect the mantle from the power supply prior to maintenance and servicing
To avoid personal injury:
• D
on't use in the presence of flammable or combustible materials, fire or explosion may result.
•
R
efer servicing to qualified people only.
•Flask or vessels should be handled with care. Appropriate safety clothing, glasses, gloves, and coat
s
s
hould be worn when operating all mantles.
CAUTION! To avoid electrical shock, completely cut off power to the unit by disconnecting the power
cord from the unit or unplug from the wall outlet. Disconnect unit from the power supply prior to
maintenance and servicing.
Spills should be removed promptly after the unit has cooled down.
CAUTION! The heating mantle can reach 400°C, DO NOT touch the heated surface. Use caution at all
times. Keep the unit away from explosive vapors and clear of papers, drapery and other flammable
materials. Keep the power cord away from the heating mantle.
DO NOT operate the unit at high temperatures without a vessel/sample into the heating mantle.
IV. Installation
Upon receiving the Hotplate-Stirrer, check to ensure that no damage has occurred in shipment. It is
important that any damage that occurred in transport is detected at the time of unpacking. If you do
find such damage the carrier must be notified immediately.
After unpacking, place the device on a level bench or table, away from explosive vapors. Ensure that
the surface on which the unit is placed will withstand typical heat produced by the unit and place the
unit a minimum of 30 cm from vertical surfaces. Always place the unit on a sturdy work surface. The
device can be plugged into a properly grounded outlet. The 230V unit plugs into a 230-volt, 50/60 Hz
source.
V. Maintenance and servicing
The device is built for long, trouble-free, dependable service. It needs no user maintenance beyond
keeping the surfaces clean. The unit should be given the care normally required for any electrical
appliance. Avoid wetting or unnecessary exposure to fumes. Spills should be removed promptly after
the unit has cooled down. Do not use a cleaning agent or solvent on the front panel or top plate
which is abrasive or harmful to plastics, nor one which is flammable. Always ensure the power is
disconnected from the unit prior to any cleaning.
Bekijk gratis de handleiding van Steinberg SBS-MR-450, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-MR-450 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 38648 MB |







