Steinberg SBS-MR-2500 handleiding
Handleiding
Je bekijkt pagina 6 van 21
10 11
19.12.2019 19.12.2019
ENEN
Message
Function name Function
description
(setting
range)
Factory
value
Lc Menu number Selecting menu 103
ET Time display 0: Turn a time
display o
1: Turn a time
display on
(0~1) 0
Hn Synchronization
mode
0: minute-based
measurement
1: hour-based
measurement
(0~1) 0
rT Time correction Correction valu-
e=[current working
time (a second)
– actual time (a se-
cond)]* 10/ actual
time (a minute)
(-999~999)
0
Message
Function name Function
description
(setting
range)
Factory
value
Lc Menu number Selecting menu 110
rSET Default settings Restoring default
settings
(0~1) 0
Warning: When an error occurs, Er (1-6) will be displayed,
then the laboratory stirrer should be switched o with the
"Power" button and then restarted.
3.3.2 TIME SETTING MENU
a) After starting the time display (ET function)
additional functions will appear on the rotation
frequency change screen:
b) Increase and decrease the function parameters by
turning the speed control knob.
Message Function
name
Function description
ST
Counter
Setting time, after which the
stirrer will turn o.
FT Setting a displayed time value
PT Stop a displayed time value
rT Setting a reverse time value
dot Decimal display 0: Turn decimal
display o
1: Turn decimal
display on
(0~1)
1
3.4. CLEANING AND MAINTENANCE
a) Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories, or if the device is not
being used.
b) Use only non-corrosive cleaners to clean the surface.
c) After cleaning the device, all parts should be dried
completely before using it again.
d) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
e) Do not spray the device with a water jet or submerge
it in water.
f) Do not allow water to get inside the device through
vents in the housing of the device.
g) Clean the vents with a brush and compressed air.
h) The device must be regularly inspected to check its
technical eciency and spot any damage.
Message
Function name Function
description
(setting
range)
Factory
value
Lc Menu number Selecting menu 9
Ear Gearing Gear/pinion
diameter
(1,0~10,0)
1,0
PoL Motor poles Motor poles (1~32) 4
InT reference
direction of the
motor
0: clockwise revo-
lutions
1: anticlockwise
revolutions
(0~1) 0
FdS Speed feedback Velocity feedback (1,0~10,0)
1,0
FdC Amperage
feedback
(1,0~10,0)
1,0
FrE Carrier
frequency
PWM carrier
frequency
(5~15) 15
Po Motor power Motor power (1~750) 40
CL Excessive
amperage
multiples
Current multiples
authorization
(1,0~10,0)
5,0
Fr Motor
revolutions
direction
0: The motor works
only forward
1: The motor work
only backward
2: The motor
works forward and
backward
(0~2) 0
db Speed dead
zone
Speed dead zone (0~100) 5
Message
Function name Function
description
(setting
range)
Factory
value
Lc Menu number Selecting menu 101
Pd Zero correction Update
a measurement
error
(-99.9
~99.9)
0.0
PK Full correction Update a measure-
ment error
PK= 1000x a me-
asured actual value
(-999~999)
0
The device should always be used when positioned on an
even, stable, clean, reproof and dry surface, and be out
of the reach of children and persons with limited mental
and sensory functions. Position the device such that you
always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
APPLIANCE LOCATION
a) Unpack the device, check if the package contains the
complete set of undamaged elements.
b) Place the stirring plate on a stable and level surface.
c) Assemble the two elements of the stand.
d) Screw a ready stand to the stirring plate.
e) Screw the xing frame to a rear part of the main
body of the stirrer.
f) Assemble the regulation screw to the stand.
g) Put the xing frame into a regulation screw clamp.
h) Place the stirrer rod in the chuck and tighten it.
i) Connect a power cord to an adapter.
j) Connect the adapter to the power supply and its
socket.
3.2. DEVICE USE
a) Place a vessel containing liquid under the main body
of the overhead stirrer so that the stirrer blade is
inside the vessel.
b) Turn „Power” button to „I” position.
c) Press „Run/Stop” button to start stirring.
d) Press and turn clockwise the regulation knob to
increase stirrer blade revolutions.
e) Press and turn anticlockwise the regulation knob to
decrease stirrer blade revolutions.
f) Press „Run/Stop” button to stop the blade.
g) Turn the device o by turning „Power” button to „0”
position.
3.3.1. CAUTION: The device is equipped with a control panel
for internal parameters presented in the table below.
However, these settings should be changed only by
a person with proper knowledge and qualications.
a) Press and hold for three seconds a function button
[12] to operate the control panel. LC menu for
selecting a function will be displayed. A user should
comply with the table to change stirrer parameters.
b) Conrm a choosen code in LC menu by choosing the
value with the speed regulation knob and pressing
the function button.
c) In the menu, a user can change parameters by
pressing the function button.
d) Parameters value is changed by turning the speed
regulation knob.
e) Press and hold for three seconds the function button
to back to an initial menu.
Message
Function name Function
description
(setting
range)
Factory
value
Lc Menu number Selecting menu 3
Pd Proportionation Proportionation
regulation
(1~100) 10
Id Integration Integration
regulation
(1~100) 5
InT Acceleration
time
0-maximum speed
time
(1~60) 10
dET Decreasing
speed time
maximum speed-0
time
(1~60) 10
SdL revolutions
minimum value
minimum speed (20~6000)
20
SdH revolutions
maximum value
maximum speed (20~6000)
2000
Bekijk gratis de handleiding van Steinberg SBS-MR-2500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-MR-2500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3223 MB |
