Steinberg SBS-LVS-200 handleiding
Handleiding
Je bekijkt pagina 8 van 72
EN
NOTICE! If there is any apparent damage to the system, please do not connect to the power line.
Preparation
1. Unpack the device and check carefully for any damage during transportation. If yes, please contact the
manufacturer/supplier for technical support.
2. Place the instrument on a stable, flat, and horizontal platform.
3. The ideal operation environment temperature is 0-40°C. Do not place the machine in a place where the
temperature exceeds 40°C or below 0°C.
4. Make sure that the hands are dry when touching the power cord to avoid the risk of electric shock.
5. Ensure that the power supply of the machine is properly grounded.
Operation instructions
Power on: Connect the power adapter to the DC power interface.
Running: Adjust the speed control knob (B, Fig. 1) clockwise or counterclockwise to set the speed. Left to
right: 0-100 rpm.
Angle adjustment: Adjust the angle adjustment knob (C, Fig. 1) clockwise or counterclockwise in the
stopped state to the required angle (0-8° adjustable), and adjust the speed control knob (B, Fig. 1) to run
the machine.
Cleaning and maintenance
Proper maintenance can keep the instrument working properly and lengthen its lifetime.
Do not spray cleanser into the instrument when cleaning.
Do not remove the power line when cleaning. Only use recommended cleansers:
Dyes Isopropyl alcohol
Construcon materials Water containing tenside / Isopropyl alcohol
Cosmecs Water containing tenside / Isopropyl alcohol
Foodstuffs Water containing tenside
Fuels Water containing tenside
For cleansers not listed, please consult the manufacturer's after-sales service department first.
Before using other methods for cleaning or decontamination, the user must ascertain with the
manufacturer that this method will not damage the instrument.
Wear the proper protective gloves when cleaning the instrument.
NOTICE!
Electronic devices cannot be cleaned with cleanser.
If maintenance service is required, the instrument must be cleaned first to avoid pollution of hazardous
substances.
If the instrument will not be used for a long time, please switch it off and place it in a dry, clean, room
temperature, and stable location.
Bekijk gratis de handleiding van Steinberg SBS-LVS-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-LVS-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13123 MB |
