Steinberg SBS-LAB-149 handleiding
Handleiding
Je bekijkt pagina 8 van 87
EN
Operation
1. Negative Pressure
1) Ensure that the filter device or any vacuuming equipment is securely connected to the vacuum pump to
maintain proper airtightness. To facilitate the connection of the rubber hose, you may apply grease or
other lubricants to the air outlet surfaces of both the vacuum pump and the filter.
2) Press the power switch and monitor the pump's operation; a normal operating sound should be heard.
Place your hand over the rear suction port to confirm the suction effect. When the port is blocked, check
the pressure gauge to ensure it reaches the desired level.
3) After the filtration process is complete, turn off the power.
2. Positive Pressure
1) Ensure that the pressurization device is securely connected to the vacuum pump to maintain proper
airtightness. To facilitate the connection of the rubber hose, apply alcohol or other lubricants to the
surfaces of the air inlet on both the vacuum pump and the pressurization device.
2) Press the power switch and observe the pump's operation; a normal operation sound should be heard.
Gently touch the rear air outlet to verify the airflow.
3) After pressurization is complete, turn off the power.
Maintenance
1. Do not use liquid or spray cleaners when cleaning the product. Instead, use a slightly damp cloth for
cleaning.
2. If the product will not be used for an extended period, unplug the power cord and store the product in a
cool, dry location, covered with a dust bag.
3. Before reusing the machine after a long period of inactivity, check that all functions are working properly
and perform a test run.
4. Prolonged use of the rubber hose may lead to contamination or aging, so it should be cleaned or replaced
as needed.
Disposing of used devices
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The plastics
used to construct the device can be recycled in accordance with their markings. By choosing to recycle you are
making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
Troubleshooting
Problem Possible cause Solution
Turn on the power switch,
but it does not work.
1. The power cable is not
connected to the socket.
1. Connect the power cord to the
socket.
Bekijk gratis de handleiding van Steinberg SBS-LAB-149, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-LAB-149 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11720 MB |
