Steinberg SBS-LAB-110 handleiding

74 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 74
EN
2. Using the device
Applicaon
This device is used for moving liquid from the original container to another container within a certain
volume range.
Device operating environment
For indoor use only
Altude: 2000 m
The working temperature range of the device is +5°C~+40°C.
The applicable temperature range of the device is 80%.
Ensure that the area around the device is free from airflow or vibraons that could
impact its performance.
Usage
Gently push the sucon tube into the silicone adapter, and carefully set it in place. For proper
inseron of sucon tube, separately hold the mouth of the adapter tube and the upper end of the
sucon tube.
By using the speed control buon below the LCD screen, you can set the desired sucon and
d
ischarge speeds. The sucon and discharge speeds have 6 steps and can be adjusted with the
speed control buons marked with up and down arrows. The LCD display shows the selected
speed. In addion, gravity can also be used for draining liquids.
Select the appropriate speed, press the sucon buon, and draw the liquid slightly over the desired
volume. Remove the sucon tube from the liquid in the container. Then press the liquid feeding
buon to discharge part of the liquid, so that the boom of the liquid in the sucon tube reaches the
desired level.
Two different drainage modes:
Gravity drainage: touch the drainage buon and press it slightly. Like this, the drainage funcon will
act under its own weight, and the liquid will be discharged naturally.
Electric drainage: pressing the discharge buon further will trigger the micro pump to speed up the
discharge speed.
(Note: in either case, the discharge speed can be sensively adjusted by finger pressure.)
Safety Precauons
Charge the device for 10 hours before its first use to ensure a sufficient power supply. For future
charges, the duraon is 2-3 hours.
Before plugging the AC charger into the power outlet, ensure that
the input voltage and connector type are compable with local standards.

Bekijk gratis de handleiding van Steinberg SBS-LAB-110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSteinberg
ModelSBS-LAB-110
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9561 MB