Steinberg SBS-FZ 3000/12M handleiding
Handleiding
Je bekijkt pagina 16 van 70
1. Hook for hanging
2. Lifting chain
3. Control chain
4. Hook for the load
3.2. Preparation for operation
ASSEMBLY OF THE UNIT
• Before installing the unit in the workplace, check its components for signs
of damage.
• Make sure that the load-bearing structure on which the device is to be
mounted will support its weight together with the weight of the load.
• The support on which the device is to be mounted must withstand 4 times
the rated load.
• Do not mount the unit on a support structure the load capacity and
strength of which have not been verified.
• When mounting the unit to the supporting structure, take special care and
ensure proper conditions for safe operation to avoid hazards leading to
personal injury.
• The user is responsible for preparing the conditions for the installation of
the device and for the installation itself.
• After installing the unit, check that the hook is properly attached and that
the latch is closed.
• Each time a load is lifted, check that the safety brake is working properly.
To do this, hang a load on the device (approx. 10% of the permissible lifting
capacity) and raise and lower it several times, making sure that after
stopping lifting/lowering the load always stops in a given position without
lowering itself.
Bekijk gratis de handleiding van Steinberg SBS-FZ 3000/12M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-FZ 3000/12M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8703 MB |
