Steinberg SBS-AC-1200 handleiding
Handleiding
Je bekijkt pagina 46 van 205
opened, but remember not to open it until the pressure on the display
has fallen below 6Kpa!
To start a new sterilization program open and close the door again
and select the desired program.
3.3.11 Transport/Storage
For transport the unit must be completely cooled down and drained
of liquids. Close the door to prevent it from opening unintentionally.
The door should be ajar when storing the unit when it is not in use.
3.3.12 Error codes
The following error codes can appear in the display of the unit under
ERROR in the event of malfunctions:
Error
code
Meaning
E0
Problem with the temperature sensor at the chamber
surfaceî
E1
Temperature inside the chamber is exceeded
E2
Evaporator temperature is too highî
E3
Pressure and temperature cannot be matched
E4
Problem maintaining the sterilization temperature and
pressure.
E5
Door open during sterilization
E6
Working an overly long time
E7
Pressure cannot be released
3.4. Cleaning and maintenance
a) Cleaning and maintenance
Pull the mains plug and let the unit cool down completely before cleaning,
adjusting or replacing accessories and when the unit is not in use.
b) Use only non-corrosive cleaning agents for cleaning the surfaces.
c) After each cleaning, all the parts should be dried well before the unit is used
again.
Bekijk gratis de handleiding van Steinberg SBS-AC-1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-AC-1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 45648 MB |
