Steinberg Padshop 2 handleiding
Handleiding
Je bekijkt pagina 33 van 58
distortion can produce analog tube distortions or hard clipping effects, or reduce the bit depth or
sample frequency.
You can use the lter envelope to modulate a large number of modulation destinations that are
accessible in the modulation matrix.
Envelope Amount
Controls the cutoff modulation from the lter envelope.
Cutoff Key Follow
Adjusts the cutoff modulation using the note number. Increase this parameter to raise
the cutoff with higher notes. At 100%, the cutoff follows the played pitch exactly.
Center Key
Species the MIDI note that is used as the central position for the Key Follow function.
Filter Shape
● LP24, 18, 12, and 6 are low-pass lters with 24, 18, 12, and 6 dB/oct. Frequencies
above the cutoff are attenuated.
● BP12 and BP24 are band-pass lters with 12 and 24 dB/oct. Frequencies below and
above the cutoff are attenuated.
● HP6 + LP18 and HP6 + LP12 are a combination of a high-pass lter with 6 dB/oct
and a low-pass
lter with 18 and 12 dB/oct, respectively (asymmetric band-pass
lter). Frequencies below and above the cutoff are attenuated. Attenuation is more
pronounced for the frequencies above the cutoff.
● HP12 + LP6 and HP18 + LP6 are a combination of a high-pass lter with 12
and 18 dB/oct and a low-pass lter with 6 dB/oct (asymmetric band-pass lter).
Frequencies below and above the cutoff are attenuated. Attenuation is more
pronounced for the frequencies below the cutoff.
● HP24, 18, 12, and 6 are high-pass lters with 24, 18, 12, and 6 dB/oct. Frequencies
below the cutoff are attenuated.
● BR12 and BR24 are band-reject lters with 12 and 24 dB/oct. Frequencies around
the cutoff are attenuated.
● BR12 + LP6 and BR12 + LP12 are a combination of a band-reject lter with 12
dB/oct and a low-pass lter with 6 and 12 dB/oct, respectively. Frequencies around
and above the cutoff are attenuated.
●
BP12 + BR12 is a band-pass lter with 12 dB/oct plus a band-reject lter with 12
dB/oct. Frequencies below, above, and around the cutoff are attenuated.
●
HP6 + BR12 and HP12 + BR12 are a combination of a high-pass lter with 6 and 12
dB/oct and a band-reject lter with 12 dB/oct. Frequencies below and around the
cutoff are attenuated.
●
AP is an all-pass lter with 18 dB/oct. Frequencies around the cutoff are
attenuated.
●
AP + LP6 is an all-pass lter with 18 dB/oct plus a low-pass lter with 6 dB/oct.
Frequencies around and above the cutoff are attenuated.
Padshop
Synth Page
33
Padshop 2.2.0
Bekijk gratis de handleiding van Steinberg Padshop 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | Padshop 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9568 MB |
