Steinberg Padshop 2 handleiding
Handleiding
Je bekijkt pagina 29 van 58
NOTE
When switching from the grain oscillator to the spectral oscillator or when selecting a new
sample for the rst time, the spectral oscillator needs some time to analyze the sample.
NOTE
Loading a new sample in the Oscillator section does not change any of the parameter settings
for the plug-in.
Position Settings
If you repeatedly play back the same portion of a sample, the sound may become too static. You
can use the position settings on the left of the waveform display to bring more liveliness into the
sound.
Position
Sets the start position within the sample, that is, the marker that is played when a note
is triggered. For example, at a setting of 50 %, the playback position is in the middle of
the sample.
Random Position
Allows you to vary the position each time that a note is triggered. At a setting of 100 %,
the playback position jumps to a random position within the sample range. This can be
used to widen the panorama of the sound.
Channel Offset
Offsets the playback position for each channel of the sample. Positive values modify
the playback position of the right channel, and negative values modify the playback
position of the left channel. In either case, the other channel is not affected. This can
be used to widen the panorama of the sound. If the sample is mono, the oscillator
creates a copy of the channel. This allows you to create a stereo sound from a mono
sample, for example.
Playback Settings
The playback settings below the waveform display allow you to set up the loop, specify playback
speed and direction, determine the number of playback markers that you want to use, etc.
Loop
●
If Loop is set to On, the loop range is played back continuously. When the loop end
is reached, the playback marker jumps back to the start of the loop.
●
If Loop is set to Alt, the playback marker travels alternatingly forwards and
backwards through the sample. This means that the playback direction changes
every time the loop start or end marker is reached.
●
If Loop is set to Off, playback stops at the end of the loop.
NOTE
If a play marker ends up outside the loop boundaries, due to the Random, Spread, or
Offset settings, playback continues until the end of the sample and ends there.
Padshop
Synth Page
29
Padshop 2.2.0
Bekijk gratis de handleiding van Steinberg Padshop 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | Padshop 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9568 MB |
