Steinberg HALion Sonic 3 handleiding
Handleiding
Je bekijkt pagina 40 van 299
● AP is an all-pass lter with 18 dB/oct. Frequencies around the cutoff are
attenuated.
● AP+LP 6 is an all-pass lter with 18 dB/oct plus a low-pass lter with 6 dB/oct.
Frequencies around and above the cutoff are attenuated.
● HP 6+AP is a high-pass lter with 6 dB/oct plus an all-pass lter with 18 dB/oct.
Frequencies around and below the cutoff are attenuated.
X/Y Control
Allows you to adjust two parameters simultaneously.
● For the lter types Single, Dual Serial, and Dual Parallel, the X/Y control
adjusts the cutoff frequency on the horizontal axis and the resonance on the
vertical axis.
● For the lter types Morph 2 and Morph 4, the X/Y control adjusts the
morphing between the
lter shapes on the vertical axis. The horizontal axis
adjusts the cutoff frequency.
● For Morph XY, the X/Y control adjusts the morphing between the lter shapes
AD and BC on the horizontal axis, and AB and DC on the vertical axis.
Cutoff
Controls the cutoff frequency of the lter.
Resonance
Emphasizes the frequencies around the cutoff. At higher settings, the lter self-
oscillates, which results in a ringing tone.
Distortion
Adds distortion to the signal. The effect depends largely on the selected lter type. At
higher settings, it creates a very intense distortion effect.
NOTE
This parameter is only available for the lter types Tube Drive, Hard Clip, Bit Red,
Rate Red, and Rate Red KF.
CF Offset
For the dual lters, this parameter allows you to offset the cutoff frequency of the
second lter, that is, of lter shape B.
Res Offset
For the dual lters, this parameter allows you to offset the resonance of the second
lter, that is, of lter shape B.
Cutoff Velocity
Controls the cutoff modulation from velocity.
Envelope Amount
Controls the cutoff modulation from the lter envelope.
Cutoff Key Follow
Adjusts the cutoff modulation using the note number. Increase this parameter to
raise the cutoff with higher notes. At 100 %, the cutoff follows the played pitch
exactly.
Center Key
Species the MIDI note that is used as the central position for the Key Follow
function.
Editing Layers
Filter Tab
40
HALion Sonic 3.4.0
Bekijk gratis de handleiding van Steinberg HALion Sonic 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | HALion Sonic 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37202 MB |
Caratteristiche Prodotto
| Soort | Audio-editor |
| 64-bit computing | Ja |
| Ondersteunt Mac-besturingssysteem | Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra |
| Mac-compatibiliteit | Ja |
| Taalversie | Engels |
