Steinbach Silent 13 handleiding
Handleiding
Je bekijkt pagina 26 van 30
50 51
049311_049312_049313_049314_049315_V2404 049311_049312_049313_049314_049315_V2404
en en
Uninstallaon
ATTENTION!
Risk of injury when moving heavy equipment!
The appliance is heavy! Incorrect liing or uncontrolled lng of the appliance can lead to injuries or damage
to the appliance.
» Li, carry or lt the appliance with at least two people, never alone.
» Ensure correct posture (straight back, secure foong, etc.).
» Use transportaon aids (e.g. pallet truck or rolling board).
» Wear protecve equipment such as safety shoes or gloves.
Terminang the cables
Disconnect the power supply
1. Press the buon on/o
12
, to switch the heat pump to standby mode.
All operang mode displays have gone out. The heat pump is in standby mode.
2. Disconnect the power cable plug
8
from the supply line to the power supply.
All display elements on the display
C
disappear.
The heat pump is disconnected from the power supply and out of operaon.
Terminaon of water pipes
1. Deacvate the water treatment pump.
2. Loosen the union nut on the water connecon inlet
7
completely.
3. Disconnect the inlet pipe from the inlet water connecon
7
.
When removing the hose end of the water pipe, hold it with the opening facing upwards to prevent the
residual water in the hose from spilling uncontrollably into the pipe.
4. Loosen the union nut on the water connecon outlet
6
completely.
5. Disconnect the drain pipe from the water connecon outlet
6
.
When removing the hose end of the water pipe, hold it with the opening facing upwards to prevent the
residual water in the hose from spilling uncontrollably into the pipe.
The water pipes are completed.
Cleaning
Cleaning the appliance
Wipe the surfaces with a dry cloth.
Examinaon
Check the following before each use:
» If damage to the device is recognizable?
» If damage to the operang elements is recognizable?
» Are the accessories in perfect condion?
» Are all pipes in perfect condion?
» Is the inlet not blocked?
» Are the venlaon slots clear and clean?
Do not operate a damaged appliance or accessories. Have it checked and repaired by the manufacturer or its
customer service or a qualied specialist.
WARNING!
Risk of re and explosion!
The refrigerant circuit of the appliance contains highly ammable, odorless gas under high pressure. There is
a risk of re and explosion if refrigerant escapes in an uncontrolled manner.
» Only operate the device outdoors.
» Keep heat sources, naked ames and ignion sources away from the appliance.
» Only store the device in well-venlated areas.
Leakage
If liquid escapes from the heat pump, it may be condensaon water or pool water.the formaon of condensaon
water is unavoidable during heang operaon. The surface of the heat exchanger becomes cold, humidity in
the ambient air condenses and can even freeze in extreme cases.the appliance monitors the temperature and
automacally defrosts the heat pump if necessary. Any condensaon is drained via the base plate of the heat
pump and if pool water leaks out, check all connecons, pipes and adapters of the heat pump for leaks.
Storage
As soon as the outside temperature permanently falls below +5°C, the heat pump should be winterized in
order to avoid damage due to ice formaon (frost blasng).
Fixed piped water pipes do not necessarily have to be uninstalled. If the locaon of the heat pump is
protected from coarse contaminaon and strong weather inuences, it is sucient to completely
drain the water from the heat pump and the water pipes. Care is required here! Frost damage is not
covered by the warranty.
Decommissioning in winter
1. Disconnect all pipes (see Uninstalling on page 50)
2. Clean the heat pump thoroughly (see Cleaning on page 50)
3. Store the heat pump in a dry and frost-free place (>+5°C) once it is completely dry.
The heat pump is shut down for the winter.
Bekijk gratis de handleiding van Steinbach Silent 13, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinbach |
| Model | Silent 13 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6137 MB |
