Steinbach Silent 13 handleiding
Handleiding
Je bekijkt pagina 24 van 30
46 47
049311_049312_049313_049314_049315_V2404 049311_049312_049313_049314_049315_V2404
en en
Seng the set temperature
1. Deacvate the key lock, if it is acve, by pressing and holding the buon mode/key lock
14
for 3
seconds.
The display key lock
26
expires.
The key lock
26
acvates automacally aer 60 seconds of inacvity.
2. Press (repeated) the buon down
11
or buon up
13
, unl the desired setpoint temperature is set.
The display temperature
15
ashes to indicate the desired setpoint temperature.
3. Press the buon on/o
12
, to conrm your entry.
The heat pump starts as soon as the input temperature (In) exceeds the set target temperature (Set).
The desired setpoint temperature is set.
Seng the power level
1. Deacvate the key lock, if it is acve, by pressing and holding the buon mode/key lock
14
for 3
seconds.
The display key lock
26
expires.
The key lock
26
acvates automacally aer 60 seconds of inacvity.
2. Press (repeated) the buon power level
10
, unl the symbol for the desired power level lights up on
the display.
Each me you press the buon, the silent-mode
16
, smart-mode
17
and power-mode
18
indicators
on the display change.
The desired power level is set.
Manual defrosng
At low ambient temperatures, the temperature at the heat exchanger can drop so low in heang mode that
the condensaon water freezes and the heat exchanger ices up. The appliance monitors the temperature and
defrosts automacally if necessary, but also oers the opon of iniang the defrosng process manually.
Acvate defrost mode
1. Acvate the heang operang mode.
The display heang-mode
22
lights up.
2. Press and hold the buon mode/key lock
14
and down
11
at the same me for about 5 seconds.
The displays defrost-mode
19
and heang-mode
22
blink.
3. Wait a few minutes unl the defrosng process is complete.
The display defrost-mode
19
no longer blinks.
The heat exchanger is defrosted. Manual defrosng is complete.
Change temperature scale [°C/°F]
The heat pump has the opon of displaying all measured and set temperatures in °C or °F. Simultaneously
press and hold the buons power level
10
and mode/key lock
14
for about 3 seconds, to switch between
the temperature scales. The corresponding symbol on the display temperature
15
lights up.
Key lock
The key lock is acvated automacally aer 60 seconds of inacvity. When the key lock is acve, the display
key lock
26
lights up. When the key lock is deacvated, the display key lock
26
goes out . By pressing and
holding the buon mode/key lock
14
for about 3 seconds the key lock is acvated or deacvated in each case.
Set the me
The heat pump has a real-me clock to operate the heat pump in a me-controlled manner using a mer.
The clock connues to run for several days even without a power supply.
Set clock
1. Deacvate the key lock, if it is acve, by pressing and holding the buon mode/key lock
14
for 3
seconds.
The display key lock
26
expires.
The key lock
26
acvates automacally aer 60 seconds of inacvity.
2. Press and hold the buon down
11
for 3 seconds.
The display me/mer
24
blinks. The me can be set.
3. Press the buon power level
10
.
The two seven-segment displays for hours of display me/mer
24
blinks.
4. Drücken Sie (wiederholt) die Tasten Ab
11
und Auf
13
, um die Stunden der Uhrzeit einzustellen.
5. Drücken Sie die Taste Leistungsstufe
10
, um die Eingabe zu bestägen.
Die beiden Siebensegmentanzeigen für Minuten der Anzeige Uhrzeit/Timer
24
blinken.
6. Press (repeated) the buon down
11
or buon up
13
, to set the minutes of the me.
7. Press the buon power level
10
, to conrm the entry.
The clock is set.
Bekijk gratis de handleiding van Steinbach Silent 13, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinbach |
| Model | Silent 13 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6137 MB |
