Steinbach Poolrunner Battery Basic 2.0 Handleiding (199 Pagina's)

Handleiding

Je bekijkt pagina 23 van 199

Charging process

1. Switch off the device before charging.

2. Connect the charger to the device.

3. Plug the charger into a socket.

The charge control indicator is lit red. The

rechargeable battery is charging.

4. When the charge control indicator is lit green,

disconnect the charger from the power supply

and the device.

The rechargeable battery is charged.

Basic settings

Adjusting the wheels

You can adapt the working radius by adjusting the wheels.

We recommend the following settings:

C-A: Setting for most pools (standard setting)

B-C: Setting for large pools

B-A: Setting for small pools

1. Press the retaining lug away from the half axle

and pull off the wheel.

2. Insert in the wheel with the catch so that it

snaps into place at the respective letter for the

selected setting.

The wheels are set.

Attaching the cleaning strips

Cleaning strips

13

can improve the cleaning of your pool, depending on the conditions on site, such as

type and quantity of dirt or surface structure of the bottom. Only operate the device with the cleaning

strips attached if this leads to a better cleaning result.

1. Insert the cleaning strips

13

into the suction

channels on the bottom of the bottom part

3

.

2. Make sure that the cleaning strips

13

have

properly engaged and have a tight fit.

The cleaning strips are attached.

Detaching the cleaning strips

1. Pull on the frames of the cleaning strips

13

and take them out of the bottom part

3

.

The cleaning strips are detached.

1

2

3

13

23

Bekijk gratis de handleiding van Steinbach Poolrunner Battery Basic 2.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.