StarTech.com CK4-P404C handleiding
Handleiding
Je bekijkt pagina 2 van 2
EDID LEARN HARDWARE INSTALLATION
The KVM is designed to learn the connected monitor’s
EDID upon power up. In the event of connecting a new
monitor to the KVM, a power recycle is required.
The KVM will indicate to the user the EDID learn process
by ashing the front panel’s LEDs. Port one
green and push button blue LEDs will both begin to
ash for about 10 seconds. When the LEDs stop ashing,
the EDID learn process is done.
If the KVM has more than one video board (such as
dual-head and quad-head models), then the unit will
continue to learn the EDIDs of the connected monitors
and indicate the progress of the process by ashing the
next port selection green and push button blue LEDs
respectively.
The monitor must be connected to the video output
connector located in the console space at the back of
the KVM during the EDID learn process.
If the read EDID from the connected monitor is identical
to the current stored EDID in the KVM then
the EDID learn function will be skipped.
1. Ensure that power is turned o or disconnected from the unit and the computer.
2. Use a DVI cable to connect the DVI output port from the computer to the corresponding DVI-I IN port of the unit.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on the computer to the respective USB ports of the unit.
4. Optionally, for CAC models, connect a CAC (Common Access Card, Smart Card Reader) to the CAC port in the user
console interface.
5. Optionally, connect a stereo audio cable (3.5 mm to 3.5 mm) to connect the audio output of the computer(s) to the
audio in ports of the unit.
6. Connect a monitor to the DVI-I OUT console port of the unit using a DVI cable.
7. Connect a USB keyboard and mouse in the two USB console ports.
8. Optionally, connect stereo speakers to the audio out port of the unit
9. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and then turn on the
computer.
Note: The computer connected to port 1 will always be selected by default after power up.
Note: You can connect 4 computer to the 4 port KVM.
—
DVI IN
—
USB K/M IN
—
USB CAC IN
—
AUDIO IN
—
DVI OUT
—
USB K/M OUT
—
USB CAC OUT
—
AUDIO OUT
Bekijk gratis de handleiding van StarTech.com CK4-P404C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | StarTech.com |
| Model | CK4-P404C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 540 MB |
