StarTech.com CAB1631D handleiding
Handleiding
Je bekijkt pagina 8 van 22
6
A slave KVM Module may be mounted to the rear vertical poles
inside a rack cabinet by the rear brackets with keyboard, mouse,
monitor connectors facing out, as figure 5.
Figure 5: Slave Console KVM switch and rear bracket attachment
The connectors (keyboard, mouse and monitor) at the Local port on
the rear of the KVM module are not applicable when the module is
connected to the drawer by the C-36 connector. When its C-36
connector is not connected to the drawer, the KVM module acts as a
rear-mount stand-alone KVM switch.
Initial Power-Up
Make sure all computers and KVM Modules are powered down
during installation. You must power up the Master KVM Module
before turning on any other devices.
For single KVM Module:
1) Apply a power adapter to the Master.
2) Turn on computers.
For cascaded Console KVM switches:
1) Apply a power adapter to the Master.
2) Apply power adapters to all Slaves.
3) Turn on computers.
Note: You may hot plug additional powered-down computer or a
slave KVM Module without turning any existing 1UCABCONS or
computer off after initial power up.
Bekijk gratis de handleiding van StarTech.com CAB1631D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | StarTech.com |
| Model | CAB1631D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2010 MB |
