Standard Horizon Quest GX1500S handleiding

Niet gecategoriseerd

Standard Horizon

92 pagina's

PDF beschikbaar

Handleiding

GX1500SPage 24

10 BASIC OPERATION

10.1 RECEPTION

1. After the transceiver has been installed, ensure that the power supply and

antenna are properly connected.

2. Press and hold the VOL/PWR knob until the radio turns on.

3. Turn the SQL knob fully counterclockwise. This state is known as “squelch off”.

4. Turn up the VOL knob until noise or audio from the speaker is at a comfort-

able level.

5. Turn the SQL knob clockwise until the random noise disappears. This state

is known as the “squelch threshold.”

6. Turn the CHANNEL selector knob to select the desired channel. Refer to

the channel chart on page 83 for available channels.

7. When a message is received, adjust the volume to the desired listening

level. The “ ” indicator in the LCD is displayed indicating that the

channel is being used.

10.2 TRANSMISSION

1. Perform steps 1 through 6 of RECEPTION.

2. Before transmitting, monitor the channel to ensure it is clear.

THIS IS AN FCC REQUIREMENT!

3 Press the PTT (push-to-talk) switch. The “ ” indicator in the LCD is

displayed.

4. Speak slowly and clearly into the microphone.

5. When the transmission is finished, release the PTT switch.

NOTE

This is a noise-canceling microphone. The oval slot on the bottom of

microphone should be positioned within 1/2 inch (1.3 cm) from the mouth

for optimum performance.

10.3 TRANSMIT TIME - OUT TIMER

(

TOT

)

When the PTT switch on the microphone is held down, transmit time is limited to 5

minutes. This limits unintentional transmissions due to a stuck microphone. About

10 seconds before automatic transmitter shutdown, a warning beep will be heard

from the speaker(s). The transceiver will automatically go to receive mode, even if

the PTT switch is continually held down. Before transmitting again, the PTT switch

must first be released and then pressed again.

Bekijk gratis de handleiding van Standard Horizon Quest GX1500S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.