Standard Horizon HX600S handleiding
Handleiding
Je bekijkt pagina 37 van 56
HX600S Page 35
dtdt
dtdt
dt (DUAL WATCH MODE)
Function: Selects dual or tri-watch as desired.
Available Values: d- (Dual Watch) / t- (Tri Watch)
Default: d-
drdr
drdr
dr (DIMMER)
Function: Setting of the Display brightness level.
Available Values: 00 / 01 / 02 / 03
Default: 02
PCPC
PCPC
PC (AUDIO PITCH CONTROL)
Function: This control changes the speaker audio to have a high or lower
sounding pitch to assist listening in quiet or noisy environments.
Available Values: ON / OFF
Default: OFF
SOSSOS
SOSSOS
SOS (STROBE)
Function: Selects the S.O.S STROBE illumination from Continuously on to
SOS strobe.
Available Values: Continue / SOS
Default: SOS
StPStP
StPStP
StP (AM STEP)
Function: Selects the AM Band frequency step size.
Available Values: 10kHz or 9kHz (for Europe)
Default: 10kHz
rEgrEg
rEgrEg
rEg (MMSI REG)
Function: Stores MMSI ID code.
Note: The MMSI can only be inputted twice. If entered more than twice, the
HX600S will have to be sent to STANDARD HORIZON factory service to
reset the MMSI.
nA1 - nA6nA1 - nA6
nA1 - nA6nA1 - nA6
nA1 - nA6 (NOAA Weather SAME Area 1 - 6)
Function: Stores NOAA Weather SAME AREA code.
The HX600S is capable of being programmed with 6 areas or your choice to
receive SAME messages. To enable the SAME function the HX600S must
be programmed with a 6 digit SAME code for the state and county you want
to receive alerts. After the code(s) are programmed the HX600S will ONLY
respond to messages encrypted with the specific state/county that has been
programmed.
Bekijk gratis de handleiding van Standard Horizon HX600S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX600S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4147 MB |
