Standard Horizon HX500S handleiding
Handleiding
Je bekijkt pagina 13 van 44
HX500S Page 11
4.1.4 USING THE CD-32 CHARGER CRADLE
1. Turn the transceiver off.
2. Insert the DC plug from the NC-88 into the DC jack on the CD-32 side
panel, then plug the NC-88 into the AC line outlet.
3. Insert the HX500S (with the battery pack) into the CD-32; the antenna
should be at the left side when viewing the charger from the front.
4. If the HX500S is inserted correctly, the Red indicator on the CD-32 will
glow. A fully-discharged pack will be charged completely in approximately
10 hours.
Important Note:
Do not leave the charger connected to the transceiver for continuous
periods in excess of 24 hours. Long term overcharging can degrade the
Ni-MH battery pack and significantly shorten its useful life.
5. When charging is completed, disconnect the pack from the CD-32, and
unplug the NC-88 from the AC line outlet.
4.1.5 MOUNTING THE CD-32 ON THE VESSEL
The CD-32 is designed to be surface on a vessel which can be connected to
the charger.
If mounting on a vessel, the CD-32 must be mounted in a location on the
vessel that is directly shielded from rain or splashes of water. After the loca-
tion is found, mount the CD-32 using the supplied mounting screws.
CD-32 Desktop Mount
Bekijk gratis de handleiding van Standard Horizon HX500S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX500S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3307 MB |
