Standard Horizon HX40 handleiding
Handleiding
Je bekijkt pagina 24 van 52
Page 22
6. Press the [▲] or [▼] key to select “M-SCAN”
or “P-SCAN”.
7. Press the [ENT/MENU] key to store the selected setting.
8. Press the [CLR/ ] key to return to radio operation.
CH12
CH09
CH1001
CH15
CH1018
CH1022
CH1061
CH1078
CH68
CH88
Memory Scan (M-SCAN)
Priority Channel
CH12
CH09
CH1001
CH15
CH1018
CH1022
CH1061
CH1078
CH68
CH88
Priority Scan (P-SCAN)
8.9.3 SCANNING OPERATION
Memory Scanning (M-SCAN)
1. Set the scan type to “M-SCAN” in the SETUP menu
(
refer to “8.9.2 SE-
LECTING SCAN TYPE”
)
.
2. Press the [SQL/VOL] key twice, then press the [▲] or [▼] key until the
squelch background noise disappears.
3. Press the [◄] or [►] key repeatedly, until the [SCAN] soft key is selected
at the bottom of the LCD.
4. Press the [ENT/MENU] key.
“MEM SCAN” will appear on the display.
Scanning will proceed from the lowest to the
highest programmed channel number and
preset channel
(
described in the next sec-
tion
)
. Scanning will stop on a channel when
a transmission is received.
The channel number will blink during recep-
tion.
5. To stop scanning, press the [16/S] or [CLR/ ] key.
Priority Scanning (P-SCAN)
1. Set the scan type to “P-SCAN” in the SETUP menu
(
refer to “8.9.2 SE-
LECTING SCAN TYPE”
)
.
2. Press the [SQL/VOL] key twice, then press the [▲] or [▼] key until the
squelch background noise disappears.
3. Press the [◄] or [►] key repeatedly, until the [SCAN] soft key is selected
at the bottom of the LCD.
Bekijk gratis de handleiding van Standard Horizon HX40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5154 MB |
