Standard Horizon HX320 handleiding
Handleiding
Je bekijkt pagina 8 van 60
Page 6
When the hailing channel (16 or 9) is clear, state the name of the other vessel
you wish to call and then “this is” followed by the name of your vessel and
your Station License (Call Sign). When the other vessel returns your call, im-
mediately request another channel by saying “go to”, the number of the other
channel, and “over”. Then switch to the new channel. When the new channel
is not busy, call the other vessel.
After a transmission, say “over”, and release the PTT (Push-To-Talk) switch.
When all communication with the other vessel is completed, end the last
transmission by stating your Call Sign and the word “out”. Note that it is not
necessary to state your Call Sign with each transmission, only at the beginning
and end of the contact.
Remember to return to Channel 16 when not using another channel. Some
radios automatically monitor Channel 16 even when set to other channels or
when scanning.
4.5 BRIDGE CHANNELS 13 AND 67
Channel 13 is used at docks, bridges and by vessels maneuvering in port.
Messages on this channel must concern navigation only, such as meeting and
passing in restricted waters.
Channel 67 is used for navigational trac between vessels.
By regulation, power is normally limited to 1 Watt on these channels. Your radio
is programmed to automatically reduce power to this limit on these channels.
However, in certain situations it may be necessary to temporarily use a higher
power. See page 14 for means to temporarily override the low-power limit on
these two channels.
4.6 SIMPLEX/DUPLEX CHANNEL USE
Refer to the section “13. VHF MARINE CHANNEL ASSIGNMENTS” for instruc-
tions on use of simplex and duplex channels.
NOTE
All channels are factory-programmed in accordance with FCC
(
USA
)
,
ISED
(
Canada
)
and International regulations. The mode of operation
cannot be altered from simplex to duplex or vice-versa. Simplex
(
ship to
ship
)
or duplex
(
marine operator
)
mode is automatically activated, de-
pending on the channel and whether the USA, International or Canadian
operating band is selected.
Bekijk gratis de handleiding van Standard Horizon HX320, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX320 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5720 MB |
