Standard Horizon HX320 handleiding
Handleiding
Je bekijkt pagina 13 van 60
Page 11
NOTES
The USB AC adaptor is only designed for the charging of the HX320’s
built-in battery, and is not suitable for other purposes. The USB AC
adapter may introduce noise to TV and radio reception in the immedi-
ate vicinity, so it is not recommended for use adjacent to such devices.
Contact Standard Horizon dealer or Factory Service about the built-in
battery replacement. Refer to the section “12.2 FACTORY SERVICE”.
6.1.3 BATTERY LIFE INFORMATION
: Full battery power
: Enough battery power
: Low battery power
: Poor battery power. Charge battery.
: Charge the battery immediately
When the “ ” icon appears, it is recommended that the battery be charged soon.
WARNING
If the transceiver will be unused for a long period of time, be sure to
fully charge the built-in battery before storing it. When the transceiver
is stored for an extended period, recharge the built-in battery every six
months to prevent it from over-discharging.
6.2 BELT CLIP INSTALLATION / REMOVAL
r To install the Belt Clip: align the
Belt Clip to the niche on the rear
of the transceiver, then slide the
Belt Clip downward until it locks
in place with a “Click”.
Strap Hole
r To remove the Belt Clip: press
the Belt Clip Tab away from the
rear of the transceiver to unlock
the Belt Clip, then slide the Belt
Clip upward to remove it.
Belt Clip Tab
Bekijk gratis de handleiding van Standard Horizon HX320, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX320 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5720 MB |
