Standard Horizon HX210 handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 19 van 52
Page 17
8.4.1 TRANSMIT POWER
The TX output power of the HX210 is set to high level (6 W
) in factory de-
fault, and the “HI” indicator is displayed on the top part of the screen.
To change the TX output power:
1. Press one of the soft keys.
2. Press the [◄] or [►] key repeatedly, until
[HI], [MD], or [LO] is displayed above a soft
key at the bottom of the LCD.
3. Press the [HI], [MD], or [LO] soft key to
switch between HI (6 W (5 W)
*
), MD (2.5 W),
or LO (1 W) output power.
*
(5 W TX required in Some Countries)
8.4.2 TRANSMIT TIME - OUT TIMER
(
TOT
)
While the PTT switch is held down, transmission time is limited to 5 minutes. This
prevents prolonged (unintentional) transmissions. About 10 seconds before au-
tomatic transmitter shutdown, a warning beep will sound from the speaker. The
transceiver automatically switches to receive mode, even if the PTT switch contin-
ues to be held down. The PTT switch must rst be released, then wait 10 seconds
before transmission may be started again. This Time-Out-Timer (TOT) prevents a
continuous transmission that would result from an accidentally stuck PTT switch.
WATER ENABLED LIGHT
When the HX210 comes in contact with water a white light will blink to
assist retrieving it in low light conditions. The light will automatically turn
off in about 15 seconds when it is removed from water.
The HX210 has a menu selection to enable and disable. Refer to SETUP
Mode Item “STROBE LED (Water Hazard)” on page 32 for details.
8.5 CHANNEL GROUP
Set the Channel Group according to the region.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “CHANNEL SETUP”.
3. Press the [SELECT] soft key.
4. Press the [▲] or [▼] key to select “CHANNEL GROUP”.
5. Press the [SELECT] soft key.
6. Press the [▲] or [▼] key to select the de-
sired channel group “INTERNATIONAL”,
“USA”, or “CANADA”
*
.
*
(In the European version, when setting the
region, the selected European Channel Group
will be displayed instead of “CANADA”. For details, refer to the Note on the
Setting the Region on the separate yellow insert sheet.)

Bekijk gratis de handleiding van Standard Horizon HX210, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkStandard Horizon
ModelHX210
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5060 MB