Stamos S-WECA-1 handleiding
Handleiding
Je bekijkt pagina 8 van 24
Rev. 06.05.2022Rev. 06.05.2022
14
15
2.9. CABLE HANGER HOOKS:
Align the cable hanger hooks with the holes of the left / right support rails, insert a
bolt through each hole and secure with a nut.
Repeat the above for all holes.
Hand tighten bolts and nuts.
2.10. FINAL STEP:
In each of the above steps the bolts and nuts are only hand tight, this makes the
assembly easier. However, all the bolts and nuts need to be tightened.
Go back to each bolt and nut and tighten with wrenches to ensure a safe and
complete unit.
3. MAINTENANCE:
Periodically tighten all of the bolts and nuts. Make sure the casters and wheels are
free of all dirt or grease, etc.
4. TROLLEY VIEW AND LIST OF THE PARTS:
No. Name Quantity
1 Base plate 1
2 Axle 1
3 Wheel 2
4 Locking pin 2
5 Caster 2
6 Right rail support 1
7 Hook 2
8 Middle plate 1
9 Left rail support 1
10 Easy pull handle 1
11 Bolts M8x30 4
12 Top plate 1
13 Chain link plate 2
14 Back vertical support panel 1
15 Nuts 44
16 Bolts M8x12 40
17 Chain 2
ENEN
Bekijk gratis de handleiding van Stamos S-WECA-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stamos |
| Model | S-WECA-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2260 MB |
