Stamos S-PLASMA 85CNC handleiding
Handleiding
Je bekijkt pagina 44 van 99
86
Rev. 04.04.2022
DEEN
MAINTENANCE
Check the pistol for wear damage, cracks or exposed wire sections. Replace or repair
any such defects before using the device. A heavily worn pistol tip/nozzle contributes
to the reduction of speed, voltage drops and crooked cuts. An indication of a worn
pistol tip/nozzle is an elongated or oversized nozzle opening. The external part of the
electrode may be recessed no more than 3.2 mm. Replace the electrode if it is worn,
as indicated by the above measurement. If the cap cannot be reattached easily, check
the thread.
WARNING!!! Always turn off the device when replacing the electro-
des and nozzles.
Inspection
1. Device should always be grounded in safe way.
2. Always check if all terminals are properly connected.
3. Check if the power cable leads the correct voltage.
4. Pay attention at the cables and hoses – they should not be damaged or worn.
87
MANUAL DE INSTRUCCIONES
expondo.de
S-PLASMA 55H | S-PLASMA 85H
S-PLASMA 125H | S-PLASMA 85CNC
S-PLASMA 125CNC
Bekijk gratis de handleiding van Stamos S-PLASMA 85CNC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stamos |
| Model | S-PLASMA 85CNC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25357 MB |
