Stamony ST-ES-500B handleiding
Handleiding
Je bekijkt pagina 15 van 66
CAUTION! The correct combination of encryption contains from 3 to 8
digits!
3.3.3 OPENING THE SAFE USING THE ENCRYPTION CODE
a) Using the lock's pushbutton panel, enter the encryption code and confirm with
"A" or "B".
The green indicator light will illuminate.
Within 5 seconds unlock the door by turning the knob and pulling it towards you.
3.3.4 BATTERY REPLACEMENT
a) If the green and red indicator lights are simultaneously lit when the safe is in use,
the batteries are about to run out and must be replaced.
CAUTION!
When entering the combination code, each digit of the
combination is confirmed by flashing the yellow indicator light and a short beep.
CAUTION!
If, after entering the code, the control panel displays a
constantly flashing yellow indicator light with a beep, this means that the
entered combination is incorrect!
To change the combination you must repeat all steps of programming the
combination!
CAUTION! After entering the wrong combination three times the lock is
temporarily locked for 20 seconds (the combination cannot be re-entered)! In
case of three consecutive attempts to enter the wrong combination the
temporary lockout will be extended up to 5 minutes! After waiting the specified
time you will be able to make another attempt to enter the code.
CAUTION! In case the code is missing or the power supply is exhausted,
the safe can be opened with additional emergency keys!
3.4. Cleaning and maintenance
a) Use only non-corrosive cleaning agents for cleaning the surfaces.
b) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
Bekijk gratis de handleiding van Stamony ST-ES-500B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stamony |
| Model | ST-ES-500B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9037 MB |
