Stairville SonicPulse MH Wash 1208 handleiding

Verlichting

Stairville

44 pagina's

PDF beschikbaar

Handleiding

4 Installation

Unpack and check carefully there is no transportation damage before using the unit.

Keep the equipment packaging. To fully protect the product against vibration, dust

and moisture during transportation or storage use the original packaging or your

own packaging material suitable for transport or storage, respectively.

Lift the device only at the base. When lifted at the rotatable mounting, the device

may be damaged.

WARNING!

Risk of injury caused by falling due to unsuitable trusses and other

xtures!

If trusses or other xtures are not designed for the weight of the

intended number of moving heads, falling can cause severe injury and

considerable damage.

Before mounting, ensure that the load capacity of trusses and other x‐

tures is sucient for the intended number of devices. Take into account

any additional load that aects the load bearing parts due to the move‐

ment of the head.

When installing and operating, make sure to follow the standards and

regulations that apply in your country.

Always secure devices with a secondary safety attachment, such as a

safety cable or a safety chain.

CAUTION!

Risk of injury due to unexpected movements of the device!

The device head may perform fast movements and generate very bright

light. This is the case immediately after the device is switched on, in

automatic or remote operation, and when a connected DMX controller

is switched o. Persons who are in the immediate vicinity of the device

may be injured or frightened by this.

Make sure that there are no obstacles within the movement range of

the mirror, and that no persons are in the immediate vicinity of the head

before switching it on and during its operation.

Switch o the device before any work is performed in the movement

range or immediate vicinity of the device, or if unauthorised persons are

in that area.

NOTICE!

Risk of overheating and re due to inadequate distance and bad

ventilation!

If the distance between the light source and the illuminated surface is

too short or the device is badly ventilated, the device can overheat and

cause res.

Make sure that illuminated surfaces are more than 2 m away.

Do not operate the device in ambient temperatures above 40 °C.

Always ensure sucient ventilation at the operating location.

Installation

SonicPulse MH Wash 1208

Moving Head

Bekijk gratis de handleiding van Stairville SonicPulse MH Wash 1208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.