Stairville SonicPulse MH Wash 1208 handleiding

Verlichting

Stairville

44 pagina's

PDF beschikbaar

Handleiding

NOTICE!

Damage to the device if operated in unsuitable ambient conditions!

The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the

ambient conditions specied in the “Technical specications” chapter of this user manual. Avoid operating it in environments

with direct sunlight, heavy dirt and strong vibrations. Avoid operating it in environments with strong temperature uctuations. If

temperature uctuations cannot be avoided (for example after transport in low outside temperatures), do not switch on the

device immediately. Never subject the device to liquids or moisture. Never move the device to another location while it is in oper‐

ation. In environments with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by

qualied specialists at regular intervals to prevent damage due to overheating and other malfunctions.

NOTICE!

Damage to the device due to high voltages!

The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess

voltages can also cause a risk of injury and res. Make sure that the voltage specication on the device matches the local power

grid before plugging in the device. Only operate the device from professionally installed mains sockets that are protected by a

residual current circuit breaker (FI). Ensure that the power cord plug is easily accessible at all times if it is the only device to safely

disconnect the device from the mains supply. As a precaution, disconnect the device from the power grid when storms are

approaching or it the device will not be used for a longer period.

NOTICE!

Risk of re by exceeding the maximum current!

The device can supply power to other devices of identical design and connected in series. If too many devices are connected, the

maximum permitted power consumption can be exceeded, which can cause the device to overheat and burst into ames. Only

connect devices of identical design to the device. When deciding how many devices you can connect in series, make sure that the

maximum output current specied on the device and in the “Technical specications” chapter of the user manual is not

exceeded. Only use power cords with a cable cross-section designed for the required current intensity when connecting the

devices in series.

NOTICE!

Possible staining due to plasticiser in rubber feet!

The plasticiser in the rubber feet of this product may react with the coating of the oor, resulting in permanent dark stains after a

while. If necessary, use a suitable mat or felt pads to prevent direct contact between the product’s rubber feet and the oor.

Safety instructions

SonicPulse MH Wash 1208

Moving Head

Bekijk gratis de handleiding van Stairville SonicPulse MH Wash 1208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.