Stairville SonicPulse LED Bar 10 Handleiding (80 Pagina's)

Handleiding

Symptom Remedy

The device does not work, no

light

Check the mains connection and the fuse.

No response to the DMX con‐

troller

1. If the display ashes, e.g. ‘d001’ , no valid DMX signal is

being received. Check that the DMX controller is

switched on. Check the DMX connections and cables for

proper connection.

2. If the display is not ashing but there is still no

response, check the address settings and the DMX

polarity.

3. Try using another DMX controller.

4. Check whether the DMX cables run near or parallel to

high-voltage cables that may cause damage or interfer‐

ence to a DMX interface circuit.

If the procedures recommended above do not succeed, please contact our Service Center. You

can nd the contact information at www.thomann.de.

Troubleshooting

SonicPulse LED Bar 05, SonicPulse LED Bar 10

73

LED Bar

Bekijk gratis de handleiding van Stairville SonicPulse LED Bar 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.