Stairville ScanSphere 300 handleiding
Handleiding
Je bekijkt pagina 11 van 40
5 Starting up
Create all connections while the device is o. Use the shortest possible high-quality
cables for all connections. Take care when running the cables to prevent tripping
hazards.
NOTICE!
Data transfer errors due to improper wiring!
If the DMX connections are wired incorrectly, this can cause errors
during the data transfer.
Do not connect the DMX input and output to audio devices, e.g. mixers
or ampliers.
Use special DMX cables for the wiring instead of normal microphone
cables.
Connect the DMX input of the device to the DMX output of a DMX controller or
another DMX device. Connect the output of the rst DMX device to the input of the
second one and so on, to form a series connection. Make sure that the output of the
last DMX device in the chain is terminated by a resistor (110 Ω, ¼ W).
When you congure a group of devices in master/slave mode, the rst unit will con‐
trol the other units for an automatic, sound-activated, synchronized show. This func‐
tion is ideal when you want to start a show immediately. Connect the DMX output of
the master device to the DMX input of the rst slave device. Then connect the DMX
output of the rst slave device to the DMX input of the second slave device and so
on.
Connections in “DMX” mode
Connections in master/slave mode
Starting up
ScanSphere 300
11
LED Scanner
Bekijk gratis de handleiding van Stairville ScanSphere 300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stairville |
| Model | ScanSphere 300 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3284 MB |
