Stairville LED Matrix Blinder 5x5 MK II handleiding

Verlichting

Stairville

44 pagina's

PDF beschikbaar

Handleiding

Symptom Remedy

The device is not working,

no light

Check the mains connection and the fuse.

No response to the

DMX controller

1. If the rst display digit is not ashing in “DMX” mode, then

no valid DMX signal is being received. Check that the DMX

controller is switched on. Check the DMX connections and

cables for proper connection.

2. If the rst display digit is ashing in “DMX” mode but there

is still no response, check the address settings and the DMX

polarity.

3. Try using another DMX controller.

4. Check whether the DMX cables run near or parallel to high-

voltage cables that may cause damage or interference to a

DMX interface circuit.

If the procedures recommended above do not succeed, please contact our Service Center. You

can nd the contact information at www.thomann.de.

Troubleshooting

LED Matrix Blinder 5×5 MKII

Blinder

Bekijk gratis de handleiding van Stairville LED Matrix Blinder 5x5 MK II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.