Stairville DuoBlind 200 RGB handleiding
Handleiding
Je bekijkt pagina 53 van 60
Symptom Remedy
The device is not working, no
light, the fan is not running
Check the mains connection and main fuse.
No response to the DMX con‐
troller
1. Check the DMX connections and cables for proper
connection
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interfer‐
ence to a DMX interface circuit.
Unintended light eects Make sure that the DMX channel assignments of the
devices do not overlap, and that the DMX start address
of devices with independent control is always higher by
the number of channels that have been set for the DMX
mode on another device.
If the procedures recommended above do not succeed, please contact our Service Center. You
can nd the contact information at www.thomann.de.
Troubleshooting
DuoBlind 200 RGB
53
Blinder
Bekijk gratis de handleiding van Stairville DuoBlind 200 RGB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stairville |
| Model | DuoBlind 200 RGB |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3688 MB |
