Stairville DuoBlind 200 RGB handleiding
Handleiding
Je bekijkt pagina 30 van 60
7. To end the self test and exit the menu, press [MENU], or wait 30 seconds.
The device returns to its original DMX state after the self test. The test values are
saved automatically when the device is switched o.
1. Open the main menu.
2. Navigate to ‘Information’.
3. Use [UP] and [DOWN] to select the ‘Fixture Use Hour’ , ‘Temperature’ , ‘Fan State’ ,
‘Firmware Version’ or ‘RDM UID’ submenu.
4. Conrm your selection with [ENTER].
ð
Depending on your selection, the display shows the operating hours, the tempera‐
ture of the LEDs, the fan status, the rmware version or the RDM UID.
5. To exit the menu, press [MENU] or wait 30 seconds.
1. Open the main menu.
2.
Navigate to ‘Information è LED Use Hour’.
Displaying device information
Displaying and resetting LED
information
Operating
30
DuoBlind 200 RGB
Blinder
Bekijk gratis de handleiding van Stairville DuoBlind 200 RGB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stairville |
| Model | DuoBlind 200 RGB |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3688 MB |
