Stairville DJ Lase RGB Pro Advanced 3000 handleiding

Verlichting

Stairville

72 pagina's

PDF beschikbaar

Handleiding

Symptom Remedy

The device is not working, no light, the fan is not

running

1. Check the power supply and the main fuse.

2. Check the safety key switch.

3. Check the external safety switch (e.g. emergency stop button)

No response to the DMX controller 1. If the display shows a ashing number, for example “001”, no DMX signal is

being received. Check the DMX connectors and cables for proper connection.

2. If the display does not ash and there is no response, check the address set‐

tings and DMX polarity.

3. Try using another DMX controller.

4. Check whether the DMX cables run near or parallel to high-voltage cables

that may cause damage or interference to a DMX interface circuit.

No response to the remote control 1. Check whether the device is in “remote control” mode. The display has to

show

r E N

2. Try using the remote control at a dierent angle to the IR sensor on the front

panel of the device. When the unit receives a signal from the remote control the

LED ‘MUSIC’ lights up briey.

3. Check the remote control battery.

If the procedures recommended above do not succeed, please contact our Service Center. You

can nd the contact information at www.thomann.de.

Troubleshooting

DJ Lase RGB Pro Advanced 3000

Showlaser

Bekijk gratis de handleiding van Stairville DJ Lase RGB Pro Advanced 3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.