Stairville DJ Lase RGB Pro Advanced 3000 Handleiding (72 Pagina's)

Handleiding

7.2.7 Setting the DMX address

1. Switch to the DMX mode. The display shows ‘d001’ .

2. Press [ENTER]. The display shows ‘001’

3. Use [UP] and [DOWN] to set the required DMX address between ‘001’ … ‘492’ .

4. Conrm the selection with [ENTER].

7.2.8 SLAVE mode

In this mode, the device exactly follows the operation of the master that it is connected to.

1. Press [MENU] to activate the main menu.

2. Press [UP] or [DOWN] repeatedly until the display shows ‘SLA’ . Conrm the selection

with [ENTER].

ð

The display shows ‘SLAV’ , the device is now in slave mode. When the display ashes,

no master is connected.

Operating

42

DJ Lase RGB Pro Advanced 3000

Showlaser

Bekijk gratis de handleiding van Stairville DJ Lase RGB Pro Advanced 3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.