SRS DC215 handleiding
Handleiding
Je bekijkt pagina 17 van 196
Specifications xv
Stanford Research Systems DC215 Voltage/Current Source
REL
Both voltage and current measurements can be offset from a stored value (VREL & IREL). The stored
REL values can be set simultaneously by a front panel keypress, entered explicitly from the Measure
menu or set over any of the remote interfaces.
Logging
Measurements can be logged to a USB drive or over any of the remote interfaces
Number of logged points 1 – 199999 or continuous logging
Digital IO
There is a single male DB-9 connector with most of the I/O signals plus configurable input and output
BNC connectors. All levels are TTL.
DB-9
Outputs Output ON (output), Trigger Out, Ready
Inputs Output ON (input), Trigger In
BNC Output
One of the following can be selected Output ON (output), Trigger Out, Ready, Measurement
Active, Step Active
BNC Input
One of the following can be selected None, Output ON (input), Trigger In
Remote Interfaces
RS-232
Connector DB-9 female
Format No parity, 8 bits, 1 stop bit, CTS/RTS
Baud rates 4800, 9600, 19200, 38400, 57800 and 115200
GPIB
Format IEEE 488.2
Address 0 - 30
LAN
10/100 Base-T
TCP/IP & DHCP
Bekijk gratis de handleiding van SRS DC215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SRS |
| Model | DC215 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 30325 MB |