SRS DC215 handleiding
Handleiding
Je bekijkt pagina 10 van 196
Safety and Precautions viii
Stanford Research Systems DC215 Voltage/Current Source
Safety Procedures and Precautions
Observe the following general safety precautions during all phases of operation of this instrument.
Failure to comply with these precautions or with other specific warnings elsewhere in this manual
violates the safety standards of intended use of this instrument and may impair the protection provided
by the equipment. Stanford Research Systems, Inc. assumes no liability for the customer’s failure to
comply with these requirements.
Warning
Dangerous voltages, capable of causing injury or death, are present in this instrument. Do not remove
the product covers or panels. Do not apply power or operate the product without all covers and panels
in place.
AC LINE VOLTAGE
The DC215 DC Voltage/Current Source operates from a 100V, 120V, 220-230V or 240V nominal AC
power source with a line frequence of 50 or 60 Hz. Before connecting a power cord to a power source,
verify that the LINE VOLTAGE SELECTOR, located on the rear panel power entry module, is set to the
correct AC line voltage. See Fuse Installation and Line Select (page 171) for detailed instructions.
Caution
The DC215 Voltage/Current Source will be damaged if operating with the LINE VOLTAGE SELECTOR set
to the wrong AC line voltage, or if the wrong fuses are installed. Verify that the correct line fuses are
installed before connecting the line cord. Use two (2) metric size 5 x 20 mm fuses. For 100V/120V, use 1
A fuses; for 220V/230V/240V use 0.5 A fuses. See Fuse Installation and Line Select (page 171) for
detailed instructions.
LINE CORD
The DC215 Voltage/Current Source uses a detachable, three-wire power cord for connection to the
power source and to a protective ground. The chassis of the instrument is connected to the outlet
ground to protect against electrical shock. Always use an outlet which has a properly connected
protective ground.
SERVICE
The DC215 Voltage/Current Source does not have any user serviceable parts inside. Refer service to a
qualified technician. Do not install substitute parts or perform any unauthorized modifications to this
instrument. Contact Stanford Research Systems or an authorized representative for service and repair
to ensure all safety features are maintained.
Bekijk gratis de handleiding van SRS DC215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SRS |
| Model | DC215 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 30325 MB |