SPL P8 handleiding
Handleiding
Je bekijkt pagina 2 van 24
P8 – Manual
2
Getting started
Read the safety instructions starting on page 10.
Make sure that the mains voltage of the P8 corresponds to the voltage
of your region and that the fuse has the correct value for the selected voltage
(see specications on page 8).
The power switch on the back of the P8 must be in the o position.
(0 is visible on the switch)
Connect the supplied power cord to the power connector of the P8 and to a power outlet.
If the supplied power cord does not match your mains socket outlet, please contact your dealer.
The devices that are to be connected to the P8 must be be switched o.
Connect your devices with appropriate audio cables (XLR, DB25) to the inputs and outputs
of the P8.
Audio cables not included in the scope of delivery.
Power on
Switch on the power switch on the rear panel of the P8 (On = switch lights up).
The PWR LED and all activated switches light up.
Activating phantom power
Please always follow these instructions to active and deactivate phantom power – also
when changing microphones. The input stages of the P8 can be damaged if you ignore
these procedures.
1. Connect the microphones to the preamps of the P8.
2. Now activate phantom power.
3. When recording is completed, rst thing is to deactivate the phantom power.
4. Wait at least one minute aer deactivation of phantom power before disconnecting the
microphone! This ensures residual current will be discharged.
Power o
Switch o the power switch on the rear panel of the P8 (O = O).
The PWR LED and all activated switches no longer light up.
Bekijk gratis de handleiding van SPL P8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SPL |
| Model | P8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3077 MB |