Speed Queen TR7006BN handleiding
Handleiding
Je bekijkt pagina 5 van 12
Installation
Before You Start
Supplies
For most installations, the basic supplies you will need are:
TLW2218N_SVG
3
4
5
6
7
2
1
1. Safety Glasses
2. Wood Block
3. Gloves
4. Wrench
5. Screwdriver
6. Pliers
7. Level
NOTE: A cloth rag and all-purpose cleaner are also
needed.
Figure 1
NOTE: If the washer is delivered on a cold day (below
freezing), or is stored in an unheated room or area
during the cold months, do not attempt to operate it
until the washer has had a chance to warm up.
NOTE: Install dryer before washer. This allows room
for attaching exhaust duct.
NOTE: This appliance is suitable for use in countries
having a warm, damp climate.
Parts Included
An accessories bag has been shipped inside your washer. It in-
cludes:
• Two filter screen washers
• Two plain rubber washers
• Four rubber feet
• Beaded strap
• Product literature
Parts Needed
Two fill hoses are required for installation. Order 205746
Washer Hose Connection Kit if needed.
If using any other hoses, follow these requirements:
• Hoses must be new.
• Hoses must be a minimum of 3/8 in. inside diameter. Smaller
inside diameter hoses will cause long fill times which could
create nuisance fill errors.
• The two plain rubber washers and two filter screens included
with the washer in the accessories bag must be installed in
the fill hose couplings. Refer to
Connect Fill Hoses
. The fil-
ter screens help prevent foreign materials from clogging the
water mixing valve.
Order of Installation Steps
The proper order of steps must be followed to ensure correct
installation. Refer to the list below when installing your unit.
1. Put on safety glasses and gloves.
2. Remove the shipping brace and shipping plug.
3. Wipe out inside of the washer.
4. Connect the fill hoses.
5. Connect the drain hose to the drain receptacle.
6. Position and level the washer.
7. Plug in the washer.
8. Check the lid lock.
9. Check installation.
Remove the Shipping Brace and
Shipping Plug
1. Remove the shipping brace from under the lid.
2. The shipping plug will be released from the base of the wash-
er when removing the cardboard base from the washer.
The shipping brace and plug should be saved and must be
reinstalled whenever washer is moved or transported to a
new location. This will prevent damage to washer compo-
nents.
Do not tilt washer to front or sides when moving.
Refer to the User's Guide for instructions on reinstalling the
shipping materials.
Installation
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
5 Part No. 204104ENR5
Bekijk gratis de handleiding van Speed Queen TR7006BN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | TR7006BN |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 1398 MB |
