Speed Queen FV6010WN handleiding
Handleiding
Je bekijkt pagina 82 van 119
Programming the Drain Step Type
The Drain Step Type allows the owner to program the drain steps
of a cycle. After selecting the desired Cycle Step number and
pressing START (enter), XXdrAi will appear in the display.
Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the options and START (enter) to select a value.
Step
Type
Display
A Display B Values Description
XXdrAi Drain Step Type (XX is step number, step type is
flashing)
En diS XXdr01 EnAbLE, diSAbL, dNod
1, dNod 2
Step Enable/Disable
Choosing dNod 1 and dNod 2 will enable the step
if the cycle modifier is chosen and set to be enabled
in Cycle Modifier Programming CNP- .
StAtUS XXdr02 PrEWSH, WASH, rinSE1,
rinSE2, rinSE3,
rinSE4, SPin
Status LED: The corresponding LED on the control
will be lit during this step.
rotAtE XXdr06
3-255 Motor On Time (seconds)
PAUSE XXdr07
3-255 Motor Off Time (seconds)
SPEEd XXdr08 no rot, LoW Ag, rEg
Ag, diStrn
15 - 90 RPMs (0.06 - 2.48
G Force)
Rotation Speed
rEvErS XXdr09 rEv on, no rEv
Reversing
oUtP 1 XXdr10 oFF, on
External Output #1
oUtP 2 XXdr11 oFF, on
External Output #2
oUtP 3 XXdr12 oFF, on
External Output #3
oUtP 4 XXdr13 oFF, on
External Output #4
Table 19
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
82 Part No. 807870ENR4
Bekijk gratis de handleiding van Speed Queen FV6010WN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | FV6010WN |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 14039 MB |
