Speed Queen FV6010WN handleiding
Handleiding
Je bekijkt pagina 78 van 119
Programming the Supply Step Type
The Supply Step Type allows the owner to program the addition
of chemicals to the load. After selecting the desired Cycle Step
number and pressing START (enter), XXSUPP will appear in the
display. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the options and START (enter) to select a value.
Step
Type
Display
A Display B Values Description
XXSUPP Supply Step Type (XX is step number, step type is
flashing)
En diS XXSU01 EnAbLE, diSAbL, dNod
1, dNod 2
Step Enable/Disable
Choosing dNod 1 and dNod 2 will enable the step if
the cycle modifier is chosen and set to be enabled in
Cycle Modifier Programming CNP- .
StAtUS XXSU02 PrEWSH, WASH, rinSE1,
rinSE2, rinSE3,
rinSE4, SPin
Status LED: The corresponding LED on the control
will be lit during this step.
NinUtE XXSU03
0-255 Step Minutes: If Programmed Cycle Time Display is
enabled and set to a value greater than zero, it will
override this time.
SECond XXSU04
0-59 Step Seconds: If Programmed Cycle Time Display is
enabled and set to a value greater than zero, it will
override this time.
v tENP XXSU05 CoLd, WArN, Hot
Water Valve Temperature. This parameter is only used
when an Independent Supply Step.
dELAy XXSU06
0-255 Delay time allows water to start flowing before chemi-
cals (internal or external) are introduced to the ma-
chine.
SHUtoF XXSU07 tiNE, LEvEL
Shutoff for external supplies. It can be set for the pro-
grammed Supply Time or when the last target water
level has been reached.
dEtbLH XXSU13 oFF, on
Detergent and Bleach
SoFtnr XXSU14 oFF, on
Softener
When programmed on in a cycle, the compartment
will be flushed by turning on for 10 seconds at the
programmed start time, then off for 15 seconds, then
on for the remaining programmed time to allow for
better flushing of the compartment.
oUtP 1 XXSU19 oFF, on
External Output #1
oUtP 2 XXSU20 oFF, on
External Output #2
oUtP 3 XXSU21 oFF, on
External Output #3
oUtP 4 XXSU22 oFF, on
External Output #4
Table 14
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
78 Part No. 807870ENR4
Bekijk gratis de handleiding van Speed Queen FV6010WN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | FV6010WN |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 14039 MB |
