Speed Queen FV6010WN handleiding
Handleiding
Je bekijkt pagina 73 van 119
Configuration
Value
Warm Final
Rinse
Warm Rinse
over-rides fill
temperature
for Final Fill
Enables
Warm Rinse
for the last
active Fill
Step in all cy-
cles
Extra Rinse
Steps Agitate
Time
Time Added
to Rinse Sta-
tus Fill and
Agitate Steps
Adds addi-
tional time for
all Agitate
Steps with
their Status
set to Rinse 1
Extra Wash
Steps Agitate
Time
Time Added
to Wash Sta-
tus Fill and
Agitate Steps
Adds addi-
tional time for
all Agitate
Steps with
their Status
set to Wash
Extra Rinse
Modifier #2
Active Steps
Enabled
Turns on all
Cycle Steps
with Active
State set to
Nod 2
Prewash
Modifier #1
Active Steps
Enabled
Turns on all
Cycle Steps
with Active
State set to
Nod 1
24 ON ON OFF OFF OFF
25 ON ON OFF OFF ON
26 ON ON OFF ON OFF
27 ON ON OFF ON ON
28 ON ON ON OFF OFF
29 ON ON ON OFF ON
30 ON ON ON ON OFF
31 ON ON ON ON ON
* Default for Cycle Modifier DELUXE Key #1 Option starting Serial No. 1503031611
** Default for Cycle Modifier DELUXE Key #1 Option through Serial No. 1503031610
*** Default for Cycle Modifier ULTRA Key #2 Option
Table 11
How to Program Cycle Modifier ULTRA Key #2
Options CNP 3
This option allows the owner to select the options that are ena-
bled when the ULTRA modifier keypad is active.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2.
Press the DELICATE (∧) or the HOT (∨) keypad until Prog
appears in the display. Press the START (enter) keypad, and
AtS 1 will appear in the display.
3. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the programmable options until CNP- appears in the
display.
4.
When CNP- appears in the display, press the START (enter)
keypad.
5. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the programmable options until CNP 3 appears in the
display.
6.
When CNP 3 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
7. Press the DELICATE (∧) or the HOT (∨) keypad to change
the configuration value.
Refer to Table 11 for the value definitions.
8. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Cycle Modifier DELUXE
Additional Wash Time CNP 4
This option allows the owner to add additional time to agitate
steps that have wash selected as their status. The additional wash
time option needs to be turned on for the Cycle Modifier DE-
LUXE Additional Wash Time to take effect.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
73 Part No. 807870ENR4
Bekijk gratis de handleiding van Speed Queen FV6010WN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | FV6010WN |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 14039 MB |
