Speed Queen FV6010WN handleiding
Handleiding
Je bekijkt pagina 71 van 119
Cycle Modifier Programming CNP-
This option allows the owner to program the machine to offer an
added prewash, extra wash time, an added rinse, extra rinse time,
a warm rinse, or any combination of the above to the customers
for an added vend price. This option is used when DELUXE or
ULTRA is selected using the modifier keypad.
How to Program Default Cycle Modifier CNP 1
This option allows the owner to set the Default Cycle Modifier.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2.
Press the DELICATE (∧) or the HOT (∨) keypad until Prog
appears in the display. Press the START (enter) keypad, and
AtS 1 will appear in the display.
3. Press the DELICATE (∧) or the DELICATE (∨) keypad to
scroll through the programmable options until CNP- appears
in the display.
4.
When CNP- appears in the display, press the START (enter)
keypad.
5. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the programmable Cycle Modifier options until CNP
1 appears in the display.
6.
When CNP 1 appears in the display, press the START (enter)
keypad. A number will appear in the display. This number
corresponds to the current default cycle modifier. Refer to ta-
ble below.
CNP 1
Default Value Cycle Modifier
0* REGULAR
1 DELUXE
2 ULTRA
Table 10 continues...
CNP 1
Default Value Cycle Modifier
*Factory default setting.
Table 10
7. Press the DELICATE (∧) or the HOT (∨) keypad to increase
or decrease the current number to the desired number selected
from the table.
8. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Cycle Modifier DELUXE Key #1
Options CNP 2
This option allows the owner to select the options that are ena-
bled when the DELUXE modifier keypad is active.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2.
Press the DELICATE (∧) or the HOT (∨) keypad until Prog
appears in the display. Press the START (enter) keypad, and
AtS 1 will appear in the display.
3. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the programmable options until CNP- appears in the
display.
4.
When CNP- appears in the display, press the START (enter)
keypad.
5. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the programmable options until CNP 2 appears in the
display.
6.
When CNP 2 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
7. Press the DELICATE (∧) or the HOT (∨) keypad to change
the configuration value. Refer to the table below for the value
definitions.
8. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Each row contains a unique combination of the words “ON” and
“OFF” that indicates if that column’s feature is turned on or off
when the value is entered. Select the desired combination of fea-
tures and enter the number found in the value column.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
71 Part No. 807870ENR4
Bekijk gratis de handleiding van Speed Queen FV6010WN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | FV6010WN |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 14039 MB |
