Speed Queen FV6010WN handleiding
Handleiding
Je bekijkt pagina 48 van 119
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
6. Press the DELICATE (∧) or the HOT (∨) keypad to increase
or decrease the value of the active digit and the START (en-
ter) keypad to enter the value of the digit and advance to the
next digit.
7. Press the START (enter) keypad with the last active digit. The
next option, dEn 1, will appear in the display.
Cycle Modifier Key 1 DELUXE Vend
Price Adder ACNP 1
This option allows the owner to set the vend price for the DE-
LUXE modifier key. This price is added onto the cycle price.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2.
Press the DELICATE (∧) or the HOT (∨) keypad until Prog
appears in the display. Press the START (enter) keypad, and
AtS 1 will appear in the display.
3. Press the DELICATE (∧) or the DELICATES COLD (∨) key-
pad to scroll through the programmable options until ACNP 1
appears in the display.
4. The DELUXE modifier LED will be lit to show which price
is being programmed.
5.
When ACNP 1 appears in the display, press the START (en-
ter) keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
6. Press the DELICATE (∧) or the HOT (∨) keypad to increase
or decrease the value of the active digit and the START (en-
ter) keypad to enter the value of the digit and advance to the
next digit.
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Cycle Modifier Key 2 ULTRA Vend Price
Adder ACNP 2
This option allows the owner to set the vend price for the ULTRA
modifier key. This price is added onto the cycle price.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2.
Press the DELICATE (∧) or the HOT (∨) keypad until Prog
appears in the display. Press the START (enter) keypad, and
AtS 1 will appear in the display.
3. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the programmable options until ACNP 2 appears in
the display.
4. The ULTRA modifier LED will be lit to show which price is
being programmed.
5.
When ACNP 2 appears in the display, press the START (en-
ter) keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
6. Press the DELICATE (∧) or the HOT (∨) keypad to increase
or decrease the value of the active digit and the START (en-
ter) keypad to enter the value of the digit and advance to the
next digit.
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Vend Price Decimal Point Ats dP
This option allows the owner to enable a decimal point to show
up in the vend price at one of two locations. For example, a vend
price of 200 can be display with a decimal point as 2.00 or
0.200.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2.
Press the DELICATE (∧) or the HOT (∨) keypad until Prog
appears in the display. Press the START (enter) keypad, and
AtS 1 will appear in the display.
3. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the programmable options until Ats dP appears in
the display.
4.
When Ats dP appears in the display, press the START (en-
ter) keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
5. Press the DELICATE (∧) or the HOT (∨) keypad to increase
or decrease the value of the parameter.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Coin 1 Value dEn 1
This option allows the owner to set a specific numerical value for
a coin entered. For example, in the United States the coin value
for one quarter would be measured in cents (25). Therefore, the
coin value entered for one quarter would be 00025.
If the Vend Price 1 is set for “.75”, and the Coin Value is set for
“00025”, the vend price displayed will decrease by 0.25 for each
coin entered and 3 coins will need to be entered to satisfy the
vend price.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
48 Part No. 807870ENR4
Bekijk gratis de handleiding van Speed Queen FV6010WN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | FV6010WN |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 14039 MB |
