Speed Queen DC5004BG handleiding
Handleiding
Je bekijkt pagina 4 van 8
Three (3) Screws
(Electric Models)
Installation - Dryer
Parts included:
1.
2.
3.
Gas models – connect gas supply pipe.
Gas service to a gas dryer must conform
with the local codes and ordinances.
Refer to installation instructions, which can be found at speedqueendoc.net
• Tighten all connections securely but do not
overtighten to avoid breaking or bending the
gas valve bracket.
4.
Electric models – connect
electrical cord with three-wire
or four-wire plug.
Refer to installation instructions,
which can be found at speedqueendoc.net
5.
Wipe out inside of dryer.
6.
Plug in the dryer.
7.
Start dryer and check that
dryer is heating.
Position and level the dryer.
• Recommended rear clearance minimum
is 2 in (51 mm) for utility connections
and 6 in (152 mm) when venting through
rear of unit
Connect exhaust system.
• Dryer must be exhausted to the outdoors
• Use 4 in (102 mm) rigid duct
• Maximum straight duct length = 65 ft
(19.8 m). Each elbow deduct 10 ft (3 m)
• Sucient make-up air must be supplied.
The free area of any opening for outside
air must be at least 40 in
2
(25806 mm
2
)
per unit
Turn on gas and check all pipe connections
(internal and external) for gas leaks by
applying a non-corrosive leak detection uid
to the ttings. If bubbles are present then a
leak is likely.
Retighten connections and recheck
for leaks.
Lint Filter Guard
(Optional)
Bekijk gratis de handleiding van Speed Queen DC5004BG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | DC5004BG |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 2960 MB |
