Speco Technologies O4P3X handleiding
Handleiding
Je bekijkt pagina 7 van 60
3
2 Web Access and Login
The IP camera settings can be accessed via a web browser (Internet Explorer 8 and up) through the LAN.
Access through IP Scanner
Network connection:
Make sure the PC and IP-Cam are connected on the same local network. The camera is set to DHCP by default and will be assigned
an IP address by the DHCP server. Make sure that the local network has a DHCP server. Routers typically have a DHCP server built in.
Install Speco Blue Scanner and run it after installation. Speco Blue Scanner is the tool for discovering the IP cameras on the local
network. It can be downloaded from www.specotech.com.
In the device list, the IP address, model number, and MAC address of each device will be listed. Select the applicable device and
double click to open up the web viewer. You can also manually enter the IP address in the address bar of the web browser.
The login interface is shown above. Default username is admin and the password is 1234.
After logging in, follow directions to install applicable plug-ins for viewing video if prompted.
If this is the first time for you to log in, the password prompt may only change the admin password. By default, the ONVIF password
will match the admin password that you set. Should you wish to change the ONVIF password to a different password than your
Bekijk gratis de handleiding van Speco Technologies O4P3X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O4P3X |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 16834 MB |