Speco Technologies O4P3X handleiding
Handleiding
Je bekijkt pagina 38 van 60
34
5. Set face comparison trigger options. Click “Comparison and Linkage” to go to the following interface.
Similarity threshold: When the similarity of the captured face picture and the face picture added into the face database exceeds the
similarity threshold, alarms will be triggered.
Push Stranger: Push the comparison alarm information of the stranger. After it is enabled, the comparison information of the
stranger will be shown on the left comparison area of the live interface.
Deduplication Period: In the set period, delete the repeated comparison results.
Alarm Trigger Mode: Face only mode. When the captured face picture is matched successfully, alarms will be triggered.
Alarm Output: Select the list type and then checkmark alarm out. Then alarm output will be triggered when the captured face is
matched successfully with the face image of the selected list.
6. Set the schedule of the face detection and comparison. The setup steps of the schedule are the same as the schedule recording
setup (See Schedule Recording).
7. Advanced configuration.
Application Scenes: “Access control”, “security monitoring” or “customize” can be selected.
Snapshot Interval: If 5 seconds is selected, the camera will capture the same target once every 5 seconds during its continuous
tracking period.
Snapshot Number: If the snapshot number is enabled and set (eg. 3), the camera will capture the same target once every 5 seconds
and it will capture this target 3 times at most during its continuous tracking period. If the snapshot number is disabled, the camera
will capture the same target once every 5 seconds until the target disappears in the detected area.
Proximity Priority Comparison: When several persons are in the recognition area at the same time, the person closer to the camera
is recognized first.
Comparison in free time: When the processor is busy, the comparison of the current detected person will not be performed
immediately (for example, there is not enough time for the processor to perform all comparisons, because so many people are
detected at the same time). It will continue after the processor load is reduced.
Face Match View
Bekijk gratis de handleiding van Speco Technologies O4P3X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O4P3X |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 16834 MB |
