Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 7 van 57
2
2 Network Connection & Login
2.1 APP Connection
1. Enable Wi-Fi network of your phone. Then scan the QR Code of the Speco Blue APP in the QSG (Quick Start Guide). Then install the
mobile APP in your phone.
2. Run the mobile APP and then log in your account of the APP (if you don’t register, please register and log in first). Then enter the
server list interface of the APP.
3. Power on your video doorbell. Then tap “Add Device” in the server list interface of the APP. Scan the QR Code attached on the
back of the video doorbell or the QR Code of the video doorbell in the QSG. After that, go to the Wi-Fi configuration interface by
tapping “Add”. When the indicator of the doorbell is blue, check “Confirmed that…” and tap “Next Step”.
4. Enter the key (or password) of the Wi-Fi network. Tap “Next Step”. Then join the Wi-Fi network by tapping “Join” .
After that, the doorbell will be automatically added to the server list.
Note: 1. When configuring the Wi-Fi network via the APP, (a). DO NOT connect the network cable to the Ethernet connector of the
device; (b). your mobile phone must be connected to the Wi-Fi network; (c). the doorbell must be within the mobile phone signal
covering area. DO NOT move your phone too far away with the doorbell.
2. After the Wi-Fi of the doorbell is successfully connected, you can use Wi-Fi or mobile web in your mobile phone as needed.
However, if you want to remotely view the doorbell video via mobile web, please make sure the wireless router/AP connected the
doorbell has been connected to the Ethernet.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
